Charcoal Filters
In the recirulation mode the charcoal filters absorb smells and unwanted odours. The charcoal filters cannot be cleaned, we recommend they should be replaced approximately every three months or more often if the hood is used for more than three hours per day.
To Remove/Replace the Charcoal Filters
1. 2. 3. 4. First remove the metal grease filters. Rotate the charcoal filter anti-clockwise (B) and remove. To replace the charcoal filters, remove the metal grease filters. Place the filter over the inlet grille at eidher end of the fan housing and rotate clockwise (A) into position. This appliance can be a possible fire hazard if the grease and charcoal filters are not cleaned and replaced as recommended.
Changing the Light Bulb
1. 2. 3. 4. First remove the metal grease filters. The light bulbs can be reached from inside the canopy. Rotate the light bulb anti-clockwise to unscrew. To replace the light bulb insert a replacement into the holder then rotate the bulb clockwise into position. Ensure you take care not to overtighten the bulb.
if the light bulb fails to function check that the bulb is fully screwed into the holder. If bulb failure has occurred then it should be replaced with a 220-240 Volt 40W clear globe shaped bulb with a small E14 screw thread. Replacement filters and light bulbs can be obtained from your local Service Force Centre.
